Below is a small selection that is available for Riser Woods, Limb Cores, and Veneers. I'll build your Custom bow out of most hardwoods, if you like an other wood that is not shown, let's talk about it.
Riser Woods Choices
Light weight riser woods-Imbuya, Zebrawood, Leopardwood, Shedua, and Black Walnut (not shown)
Medium weight riser woods-Bubinga, Maples, Wenge, Bolivian Rosewood, and Bocote
Heavy weight riser woods-Cocobolo, Ziricote (NO LONGER AVAILABLE), Macassar Ebony, Dymondwood, Honduras Rosewood, Black African, and Verawood
(For more wood options and combinations please check out Bow Photos.)
Limb Cores Available
All cores are vertically laminated. The Bamboo that I use is Plyboo or Actionboo. The Actionwood is Maple (old Stock), the new Actionwood is Yellow Birch and I won't use that material in a limb core. Pictured (right) are custom vertically laminated hickory. I cut and grind Select boards to 1/8". Then glue them into a block, cut, and grind them for your cores.
Limb Veneer Choices
Choice of limb veneers should be light in color.....that away the silver streaks in the clear glass won't be as noticeable. Darker veneers look great until you get them in the sunlight. I don't make the glass Gordon's Composite Inc. does, so I will not be responsible for the silver streaks.
Checkered Grip
18 lines per inch, checkering where is counts, thumb & finger groove down to the heal of your bow hand.
